BRDRZ - VY-KOTE 443 CLEAR CONVERTER, 443C0910
- MSDS: BRDRZ
- Manufacturer: DEVOE COATINGS CO
- Product Name: VY-KOTE 443 CLEAR CONVERTER, 443C0910
- National Stock Number: 8010-00N037075
Product Identification
Product ID:VY-KOTE 443 CLEAR CONVERTER, 443C0910
MSDS Date:09/27/1990
FSC:8010
NIIN:00N037075
Kit Part:Y
MSDS Number: BRDRZ
Responsible Party
LOUISVILLE, KY 40207
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 502-897-9861
Cage: 1HK86
Contractor
Telephone: 502-897-9861
Cage: 1HK86
Ingredients
WELDING & FLAME CUTTING ON SURFACES COATED W/THIS
RTECS: 9999999ZZ
HVR/AIR.
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 65%
OSHA PEL 400 PPM;500 PPM STEL
ACGIH TLV: 400 PPM;500 PPM STEL
HVR/AIR.
CAS: 7664-38-2
RTECS: TB6300000
Fraction By Weight: 15%
OSHA PEL 1 MG/M3;3 STEL
ACGIH TLV: 1 MG/M3;3 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
LTR/AIR.
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 20%
715.62 G/L.
RTECS: 9999999VO
NIOSH/MSHA APPRVD AIR SUPPLY RESPS/HOODS. USE
RTECS: 9999999ZZ
BRAZING & SANDING MATERIAL COATED W/THIS PRODUCT.
RTECS: 9999999ZZ
STDS IN MIXING, APPLICATION & CURING AREAS & TO REMOVE
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:IRRITATION OF RESPIRATORY
TRACT; HEADACHE, NAUSEA, DIZZINESS. SKIN/EYE CONTACT:PRIMARY
IRRITATION. CHRONIC:PROLONGED & REPEATED BREATHING OF SPRAY MIST
&/OR SANDING DUST OVER A PERIOD OF Y EARS MAY CAUSE DUST DISEASE OF
THE LUNGS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE, WHEN USED I/A/W SAFE HANDLING
& USE INFORMATION.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. EYES:FLUSH IMMEDIATELY W/LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CONSULT MD FOR MEDICAL
TREATMENT. SKIN:REMOVE W/SOAP & WATER. REMOVE SOILED CLOTHING.
INGEST:DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE
VOMITING. CONSULT MD IMMEDIATELY. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point:56.0F,13.3C
Lower Limits:2%
Extinguishing Media:IN CASE OF FIRE USE CO*2, DRY CHEMICAL, FOAM OR
OTHER NFPA APPROVED METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SUMMON PROF FIREFIGHTERS. WATER SPRAY MAY BE INEFT. IF WATER IS
USED, FOG NOZZS ARE PREF. IF (SUPDAT)
Unusual Fire/Explosion Hazard:DUE TO PRESS BUILD-UP, CLSD CNTNRS
EXPOSED TO EXTREME HEAT MAY EXPLODE. DURING EMER CNDTNS, OVEREXP TO
DECOMP PRODS MAY CAUSE HLTH HAZ. SYMPS MAY NOT BE(SUPDAT)
Accidental Release
Spill Release Procedures:WASH W/WATER. BEFORE ATTEMPTING CLEAN-UP,
REFER TO HAZARD CAUTION INFORMATION IN OTHER SECTIONS OF THIS MSDS.
CONTAIN SPILLED MATERIAL & REMOVE W/INERT ABSORBENT. STORE IN
CLOSED CONTAINER UNTIL PROPE RLY DISPOSED OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT BREATHE VAPORS, SPRAY MISTS OR
SANDING DUST. USE ONLY W/ADEQUATE VENTILATION. DO NOT GET IN EYES.
STORE <110F & KEEP FROM FREEZING.
Other Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT REUSE
EMPTY CONTAINERS. DO NOT TRANSFER CONTENTS TO BOTTLES OR OTHER
UNLABELLED CONTAINERS. KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAA
W/UNRESTRICTED VENT & DURING SANDING/GRINDING OPERATIONS, USE
NIOSH/MSHA APPRVD MECH FILTER RESP TO REMOVE SOLID AIRBORNE
PARTICLES OF OVERSPRAY & SANDING DUST . WHEN USED IN RESTRICTED
VENT (SUPDAT)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAM CONC BELOW CURRENT APPLIC SAFETY & HLTH (ING 7)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health
FIRE FIGHT PROC:EXPOSED TO FIRE/EXTREME HEAT, WATER SHLD BE USED TO
COOL CLSD CNTNRS & PVNT PRESS BUILD-UP/POSS AUTO-IGNIT. EXPLO
HAZ:IMMED APPARENT. OBTAIN MED ATTN. RESP PROT:AREAS, WEAR
NIOSH/MSHA APPRVD CHEM/MECH FILTERS DESIGNED TO REMOVE COMBINATION
OF PARTICULATES & VAP. WHEN USED IN CONFINED AREAS, WEAR (ING 5)
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>180F,>82C
Vapor Pres:SEE INGS
Vapor Density:SEE INGS
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:92.55
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE, OXIDES
OF PHOSPHORUS.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.